Description
The Arches fixture is available in the following finishes: machined copper, brass, or brass with black Cerakote®.
Machined copper and brass offer a beautiful living finish that weathers over time to a unique patina.
Brass fixtures with black Cerakote® H Series ceramic coating offer superior corrosion resistance, durability, chemical resistance, and thermal stability.
To clean the fixture, periodically wipe it down with a mild soap and water.
ADJUSTING THE FIXTURE
Turn the thumbnut counter-clockwise to loosen the knuckle.
Rotate the fixture vertically to the preferred position.
Turn the thumbnut clockwise to hold it in the preferred position.
INSTALLING THE LAMP
Loosen the thumbscrew on the adjustable shield and remove it from the fixture body.
Unscrew the fixture body from the base.
Install the lamp in the socket with the tension spring behind the body of the lamp.
After lamp is installed, compress the tension spring as you thread the metal body into the base.
Return the adjustable shield to the preferred position and tighten the thumbscrew to hold it in place.
INSTALLING FIXTURES IN SURFACE MOUNT APPLICATIONS
IMPORTANT: DO NOT INSTALL ON OR NEAR ANY HIGH VOLTAGE POWER LINES
Align the bracket mounting holes with the surface to which to mount the fixture.
Use a white paint marker to mark the mounting holes on the surface. Then use a 1/4” drill bit to drill pilot holes.
Thread one of the stainless steel nuts onto the bolt ends of each screw/bolt.
Use an adjustable wrench to affix the screw ends into the pilot holes.
Align the mounting bracket with the U slot facing upward over both bolt ends.
Thread the stainless steel nuts to the bolt ends and tighten them against the bracket.
Pass the fixture wires through the brass nut and thread it onto the fixture body.
Pass the fixture wires through the top of the bracket.
Rest the threaded portion of the knuckle into the U portion of the bracket with the brass nut on the inside.
Use the stainless steel wrench provided to tighten the brass nut as you position the fixture toward the illumination target.
Use the Lighting Shrink cable connections provided to connect the fixture wires to the main cable.
The Brilliance Metal Works Arches Directional Down Light.
Watch the full Brilliance Metal Works playlist of videos.
Reviews
There are no reviews yet.