| Product | Certification Number | Category | Installation Requirements |
|---|---|---|---|
|
2018-036 |
Certified Lamps |
Must be installed in a low mounted, downward
directed and shielded fixture |
|
|
2018-036 |
Certified Lamps |
Must be installed in a low mounted, downward
directed and shielded fixture |
|
|
2018-036 |
Certified Lamps |
Must be installed in a low mounted, downward
directed and shielded fixture |
|
|
2018-036 |
Certified Lamps |
Must be installed in a low mounted, downward
directed and shielded fixture |
|
|
2018-036 |
Certified Lamps |
Must be installed in a low mounted, downward
directed and shielded fixture |
|
|
2018-036 |
Certified Lamps |
Must be installed in a low mounted, downward
directed and shielded fixture |
|
|
2018-036 |
Wildlife Certified Integrated Lights |
• Must be installed with the approved integrated Amber LED
• Must be installed in a low, shielded location and directing the light downward and away from the beach |
|
|
2019-270 |
Wildlife Certified Integrated Lights |
• Must be installed with the approved integrated Amber LED
• Must be installed in a low, shielded location and directing the light downward and away from the beach
• If used in a fixture, the fixture must meet the FWC Lighting Guidelines for the appropriate fixture type |
|
|
2019-269 |
Widlife Certified Fixtures |
• Amber LED
• Must be installed below structures
• Allowed on the ground floor only, unless on the landward side of the structure
• Additional shielding may be necessary if visible from the beach |
|
|
2019-268 |
Widlife Certified Fixtures |
• Amber LED
• Must be downward directed
• Maximum mounting height of 24” from the ground
• Additional shielding may be necessary if visible
from the beach |
|
|
2019-267 |
Widlife Certified Fixtures |
• Amber LED
• Must be downward directed
• Maximum mounting height of 24” from the ground
• Additional shielding may be necessary if visible from the beach
|
| Product | Certification Number | Category | Installation Requirements |
|---|---|---|---|
|
Under Review |
Fixtures Under FWC Review |
Light Source Approved Under
Certification Number 2019-270 |
|
|
Under Review |
Fixtures Under FWC Review |
Light Source Approved Under
Certification Number 2019-270 |
|
|
Under Review |
Fixtures Under FWC Review |
Light Source Approved Under
Certification Number 2018-036 |
|
|
Under Review |
Fixtures Under FWC Review |
Light Source Approved Under
Certification Number 2018-036 |
|
|
Under Review |
Fixtures Under FWC Review |
Must be installed in a low mounted, downward
directed and shielded fixture |
|
|
Under Review |
Fixtures Under FWC Review |
Light Source Approved Under
Certification Number 2018-03 |
|
The IP Code is published by the International Electrotechnical Commission (IEC).
Classifies and rates the degree of protection provided against the intrusion (including body parts such as hands and fingers), dust, accidental contact, and water by mechanical casings and electrical enclosures.
0 No protection against contact and
ingress of objects.
1 Protected against any large surface
of the body, such as the back of
a hand. Protected against solid
objects greater than 50mm in size.
2 Protected against access to
hazardous parts by a finger or
similar object. Protected against
solid objects greater than 12.5mm
in size.
3 Protected against access to
hazardous parts with a tool or
thick wire. Protected against solid
objects greater than 2.5mm in size.
4 Protected against access to
hazardous parts with a wire, screw,
etc. Protected against solid objects
greater than 1mm in size.
5 Protected against access to
hazardous parts. Dust protected.
6 Protected against access to
hazardous parts. Dust-tight.
0 No protection.
1 Protected against water drops.
2 Protected against water drops at a
15 degree angle.
3 Protected against water spray at a
60 degree angle.
4 Protected against water sprayed
from all directions. Limited ingress
permitted.
5 Protected against low pressure jets
from all directions.
6 Protected against strong jets
of water. For use on ship decks.
Limited ingress permitted.
7 Protected against the effects of
temporary submersion in water.
Test requires 30 minutes at 1 meter
depth.
8 Protected against the effects of
long term submersion. Customer
specification applies to a specified
pressure and specific testing
maybe required.
9 Protected against high pressures
associated with steam cleaning.
7202 East Cave Creek Road, Suite 3A
Carefree, AZ 85377, USA
Mailing Address:
PO Box 2281
Carefree, AZ 85377
To apply, send your resume and cover letter to info@brillianceled.com.
