Description
The top of the Black Diamond MR16 Well fixture is available in Black or Bronze finishes and the body is made of composite material.
To clean the fixture, periodically wipe it down with a mild soap and water.
INSTALLING THE LAMP
Loosen the Allen screws on the lens cap and remove.
Install the lamp into the socket.
Return the lens cap to the fixture base and tighten the Allen screws.
INSTALLING THE FIXTURE
Dig a hole in the ground approximately 8” wide by 10” deep.
Connect the power cable to the fixture, leaving 2 feet of wire coiled in the bottom of the fixture for future service.
Pour 8” of pea gravel in the hole.
Place the fixture in the center of the hole.
Add more pea gravel to fill the hole 1” before the fixture lip. This allows for proper drainage around the fixture.
Place the specified lens assembly on the top of the fixture and tighten it Use the specified lens in all applications to protect from debris.
Apply glass wax on top of the lens to protect against standing water.
Reviews
There are no reviews yet.