SOFT SOIL APPLICATIONS: INSTALLING THE GROUND STAKE & FIXTURE

1. Connect the power cable from the fixture body to the landscape cable.

2. Lay the power cable into the slotted relief on the stake.

3. Press the fixture and stake into the ground.

4. Use a level to ensure the top of the stake is level with the ground.

HARD SOIL APPLICATIONS: INSTALLING THE GROUND STAKE & FIXTURE

1. Unscrew the fixture body from the stake.

2. Dig a hole approximately 4” wide by 10” deep and gently tap the stake into the ground with a rubber mallet.

3. Use a level to ensure the top of the stake is level with the ground.

4. Reinstall the fixture body onto the stake and lay the power cable into the slotted relief on the stake.

5. Connect the power cable from the fixture body to the landscape cable.

ADJUSTING THE FIXTURE

1. Turn the thumbnut counter-clockwise to loosen the knuckle.

2. Rotate the fixture vertically to the preferred position.

3. Turn the thumbnut clockwise to hold it in the preferred position. Adjusting the fixture allows for dark sky ordinance applications.

CHANGING OUT LENSES

1. Use a screwdriver to remove the two screws and then remove the lens cover.

2. Remove the lense from the gasket and place the new lens in the gasket. 

3. Reattach the two screws to the lens cover and tighten.